Bentonite Supplier for Oil Field Industries. It is a drilling-grade Bentonite which is naturally occurring clay. It is a High Yield Natural Sodium montmorillonite. It meets API 13A Standards. Bentonite, is a very fine grind material mostly a composite of clay minerals, especially montmorillonite which chemically describes as hydrous alumina-silicate and contains small amounts of alkali and alkali-earth metals.
Bentonite API, Montmorrilonite
• It is Viscosifier and Filtration control agent for water based Mud Systems.
• It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit.
• It is also used for clearing cat litter
Bentonite, sometimes refer as sometimes referred to as Montmorrilonite is a naturally occurring substance, composed of a number of layers, each approximately 10 angstroms thick, and each consisting of two tetrahedral and one octahedral unit. This structure is responsible for three important characteristics, the ability to absorb large amounts of moisture, the ability to exchange ions and thixotropic gel formation.
Bentonite Powder
We are reputed as one of the most overruling Bentonite Mineral Powder Manufacturers and Suppliers in India. The unmatched quality and efficacy of Bentonite Powder in various sectors like Drilling, Effluent Treatment, Electrical, Engineering, Fertilizer, Foundry, Iron ore Pelletization, Liquor & Food, Pesticides and Pharmaceutical has played a vital role in the enhancement of the demand. Moreover, Bentonite Clay Powder is available in varied grades.
Application
Drilling
Effluent Treatment
Electrical
Engineering
Fertilizer
Foundry
Iron ore Pelletization
Liquor & Food
Pesticides
Pharmaceutical
Bentonite can be Broadely classified in 2 grades :
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped through the core in to the hole, then powder would be the preferred option.
The greatest application of bentonite in industries is the result of its swelling property, while combine with water able to perform multitude jobs. The sodium bentonite having more water absorption capacity makes it suitable for industries like Foundry and Civil engineering application and the calcium bentonite absorb lesser than Sodium still it has some special application like cosmetics, paper, Animal feed binder as many more to describe. Swell Well Mine Chem drilling grade Bentonite is basically a sodium bentonite acquired naturally from the mines. The mineral is processed using the advanced chemical technology for drilling from ores. The below features highlights the quality of the Swell Well Mine Chem Drilling Bentonite, Offers impermeability, Provides high barrel yield. Bentonite is valued in foundry sand binding, drilling mud and sealing agent in civil engineering works, bentonite is used as a mud constituent for oil and water well drilling. Swell Chem Mine is offering Bentonite products for drilling industry. What is Drining Bentonite ? Drilling Bentonite is the Bentonite formed to be used in drilling mud or fluid.
Advantage
• It helps improve hole cleaning capacities of drilling fluids.
• It is effective as a filtering agent.
• It promotes borehole stability.
• It can be added directly to fresh water or fresh water based drilling fluids.
Bentonite premium quality products exporter from India to Middle East - Dubai.
Various grade of Bentonite :::
Drilling Grade 1
API 13A Section – 9 Grade Bentonite Powder:
Physical Analysis:
PROPERTIES | PROTOCOL | UNIT | REQUIRED | RESULT |
Viscometer Dial Reading at 600 rpm | API Spec. 13A:2004/ ISO 13500: 1998 | r/min | 30 | 36 |
Yield Point / Plastic Viscosity Ratio | API Spec. 13A:2004/ ISO 13500: 1998 | _ | 3 Max | 2.5 |
Filterate Volume | API Spec. 13A:2004/ ISO 13500: 1998 | ML | 15 Max | 14.6 |
Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by weight | 10.0 max. | 10 |
Dry Screen Analysis(Residue Greater than 75 Microns)% | API Spec. 13A:2004/ ISO 13500: 1998 | % by weight | 4.0 max. | 3.0 - 4.0 |
Drilling Grade API Packing 25 Kgs
IOP Grade Bentonite lumps :
Properties | Protocol | Unit | REQUIRED |
Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by wt. | 12% to 40 % max. |
LOI | IS:2000(P-1)-1985 | % by wt. | 5 – 10. |
Free Swelling Volume 2gm/100ml | ASTM D 5890:1995 | ml | 32 min. |
PH Value of 5% gel | IS:6186-1986 | pH | 8.0 – 10.0 |
Plate Water Absorption (16 hours) | ASTM E 946 | % | 720- 760 |
Gel Time 2.5gm/25 ml | IS:12446-1988 | second | Instant |
Methylene Blue Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 350 - 400 |
Lumps size | IS:6186-1986 | % | 10 to 40 m.m. |
Chemical specification:
Alumina as AL2O3%>15.0-19.0 Sodium max 2.70
Calcium as Cao%1.5-2.0 Na2O 2.0-2.5
Mgo 2.5-3.5 iron as Fe2o3% 13.0-18.0
IOP Grade Lumps | 25 Kg Packing
Product: Benotonite Powder for Grouting
Physical Analysis:
Properties | Protocol | Unit | Result |
Liquid Limit | IS:12446-2007 | ml/100 gm | 350 - 450 |
Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by wt. | 12.0 Max |
Dry Screen Analysis (passing through 75 um sieve) | IS:12446-2007 | % by. Wt. | 85.0 min. |
Free Swelling Volume 2gm/100ml | ASTM D 5890:1995 or IS:12446-2007 | ml | 30 min |
PH Value of 5% gel | IS:12446-2007 | pH | 9.5 - 10.0 |
Gel Time 2.5gm/25 ml | IS:12446-1988 | second | Instant |
Filterate Volume | API Spec. 13A:2004/ ISO 13500: 1998 | ml | 20 max |
Viscosty at 600 rpm | API Spec. 13A:2004/ ISO 13500: 1998 |
| 30 min |
Methylene Blue Value | API spe 131:2004/ ISO 10416:2002 / IS:12446-2007 | mg/gm of clay | 350 - 400 |
Grouting Grade | 25 Kg Packing
PRODUCT: Ceramic Grade Bentonite Powder
Physical Analysis:
Properties | Protocol | Unit | Result |
Free Swelling Volume 2 gm/100ml | IS:12446-2007 | ml | 12 - 18 |
Base Exchange Capacity | IS:12446-2007 |
| 70 - 80 |
Moisture Content % by weight | IS:12446-2007 | % | 10.0 - 12.0 |
PH Value 2% slurry | IS:12446-2007 | 0pH | 8 - 9 |
Quartz Content | IS:12446-2007 | % | 2 - 3 % |
Dry Mesh % Passing 200 B.S.S | IS:12446-2007 | % | 85 Minimum
|
Ceramic Grade | 25 Kg Packing
<
Sodium Montomorillonite