Propylene glycol inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer, in water-based, closed-loop heating and air-conditioning systems. RXSOL Corrosion Inhibited MPG is an engine coolant concentrate based on mono propylene glycol with high quality corrosion inhibitor. Also Antifreeze MPG does not contain nitrite, amine, phosphate, borate and silicates inhibition suitable for cooling systems of all types of internal combustion engines.
Chiller Liquid, Chiller Liquid for closed loop HVAC, Inhibited Ethylene Glycol Heat Transfer Fluid
Glycol characteristic is to transfer heat from one place to other, due to that water-miscible glycol based coolant frequently used in heat transfer and cooling applications. Addition of Propylene Glycol in water enhances heat transfer parameters than water.
Dose : For corrosion protection, always use after dilution ration 30 to 52 volume percentage. Coolant Additive can be use after compatibility test or by manufacturer recommendation.
This Inhibited Propylene glycol heat transfer fluid has an operating temperature range of -50°F to 325°F; with fluid freeze protection to below -60°F, and system burst protection to below -100°F.
This fluid is specially formulated for HVAC systems to keep pipes free of corrosion without fouling.
This fluid is recommended for use in applications where low acute oral toxicity is important or where incidental contact with drinking water is possible.
PROPYLENE GLYCOL supplier and exporter. Experts suggest in Airstack Chiller mixing of propylene glycol with water always be beneficial. Mixture in recirculating chillers is beneficial whenever the coolant temperature set point is below 10°C (48°F)
MPG Antifreeze Heat Transfer Liquid manufacturer and supplier in India Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Surat, UAE Middle East Fujairah, Ajman, Abudhabi, Sharjah, Dubai Oman Muscat Barka Ruwi Sohar CANADA, Qatar, Sudan, Yemen, Nairobi Kenya
Benefits
• Most commonly suitable in all cooling systems of all types of liquid cooled engines
• Presence of Corrosion inhibtor minimises risk of scale deposits on hot surfaces
• Blended with antifoam to avoid FOAM formation during circultaion of liquid.
• This coolant is suitable in Extreme winter as well as hot seasons for type engine coolant
• Presence of Corrosion Inhibitor protect all metal contact.
• Propylene Glycol MPG doesn't react with rubbers and plastics of coolant systems
• Non Hazardous - Low toxicity value
Inhibited Ethylene Glycol Heat Transfer Fluid