RXSOL - Evaporator Treat-51

Hydrogen Sulfide Scavenger -RXSOL-50-5014-025

H2S Scavengers and Speaciality Chemicals to Reduce Hydrogen Sulfide Exposure

Alias:

MC MX 2-1106 , H2S Scavenger

Active Matter:

98-100

Application:

Hydrogen sulfide (H2S) naturally occurs and may already by present informations can be the result of sulphate reduicing bacteria (SRB) in your process systems. Ones established, it can potantially be carried in hydrocarbon streams, resulting in servere gatharing lines, creating high failure rates in your production.

Through stratgic H2S scavenger applications and speaciality chemicals,Rx Marine International chemicals experts can help reduce H2S levels and lower overall solids in your system, reducing any gas or fluid souring while controlling corrosion.

If you encounter hydrogen sulfide in your system, Rx Marine International can perform a fluid compatibility test to determine H2S levels and customize a chemical solution to fit your production needs.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Hydrogen Sulfide Scavenger is works as a corrosive Acidic GAS Remover from system as well as from working station. which is not only damaging precious instrument but also creating Worker Health problem by attacking on respiratory system.

The neutralizing effect of H2S is the result of a simple chemical reaction between the components of an RXSOL-11-5014-210 molecule and an offensive, toxic odour molecule.

Hydrogen Sulfide (H2S) + RXSOL-11-5014-025 = Bi Sulfide salt

The resultant products in the above equations are safe and stabilized compounds, which are neutral, harmless, and odour free. They dissolve in water and will not be re-released into the atmosphere in normal conditions.

Note:

Benefits:

Improved safety due to reduced H2S content
Meet contract sales limit for H2S content
Removal of hydrogen sulfide gas from process systems, therefore reducing corrosion
The reaction products can be easily removed from the process systems
Maintains asset integrity and reduces the need for new equipment

Related Products:

One Shot Universal Liquitreat 100 25 Ltrs

Alkalinity Control 25 Ltrs

Hydrazine Hydrate 25 Kg

Oxygen Control Corroision Inhibitor

Oxygen Scavanger

Featured Product :

Featured Product

Short Description:

Removal of hydrogen sulfide gas from process systems, therefore reducing corrosion

Alias:

1-Hydroxy Ethylidene-1,1-Diphosphonic Acid [HEDP 60%],Hydroxyethylidenedi(phosphonic acid); Dequest 2010; Etidronic acid; HEDP, AQUACID 105EX

Active Matter:

58-62

Application:

RXSOL-81-8160-250 chemically having wide range of applications including scale prevention and corrosion inhibition in water treatment.

Hydroxy Ethylidene -1,1-Diphosphonic acid is organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties Hydroxy Ethylidene -1,1-Diphosphonic acid has a wide range of applications. One of the most important applications is in scale prevention and corrosion inhibition in water treatment.

Packing Size:

275.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. Its efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. Very effective in protecting metal corrosion. HEDP also having very strong chlorine stability.

Note:

Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Featured Product :

Featured Product

Article News:

Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment

Short Description:

Chelating agent, Scale and Corrosion Inhibitor. Scale prevention and corrosion inhibition in water treatment.

HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is

used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating.

Synthesis / Manufacturing Process of HEDP:
The primary raw materials used to manufacture HEDP are acetic anhydride and either phosphorus acid or phosphorus Trichloride. The phosphorus trichloride is converted to phosphorus acid within the reaction vessel, and then reacts with the acetic anhydride.

Uses / Application of HEDP
HEDP is used as a strong Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment, Textile, Sugar Processing, Dye, Soaps & Detergents.

Antiscalant 9209 RX is specially designed to control the development of scale in seawater distillation plants. It is based on a synergistic blend of phosphonates which are found to be more effective than other polymers at controlling carbonate and sulphate scale formation in sea water distillation units .

Alias:

Hydrex 9209 , Metito M 915, Genesys LF

Application:

PREVENTS IRON FOULING and SILICA ANTISCALANT properties.

Convenient liquid formulation for automatic dosing using suitable dosing equipment.
Prevents formation of hard scale in seawater distillation units.
Performance surpasses other similar products.
Cost effective concentrate.
Effective at high temperatures.

Packing Size:

30.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

The correct dosage rate is dependant upon several parameters, including feed temperature, pH, and chemical analysis and will be specified by your VWS consultant after a detailed survey of your plant. To obtain the best results, Antiscalant 9209 RX should be added continuously using a suitable metering pump.
In general PRACTICE :
Antiscalant 9209 RX should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 2 – 4 mg/L.
Antiscalant 9209 RX may also be used in sea water applications where iron is present, recycle of brine is in use or there is no feed water pH reduction by acid dosing.

Typical dose rates are 0.5 – 1.0 mg/L
Antiscalant 9209 RX dose rate in the feed water should be less than 5 mg/L in potable water systems.
Antiscalant 9209 RX can be diluted and is fully miscible with water in all proportions.

Note:

Antiscalant 9209 RX is an aqueous solution of neutralised phosphonic acid. It has been approved for use in potable water applications and does not contribute to assimilable organic carbon (AOC), which can act as source of nutrient for micro-organisms.

Featured Product :

Featured Product

Article News:

Antiscalant supplier in Mumbai

How to improve Distilled Water quality

Short Description:

Antiscalant for Water Distillation Units , specially designed to control the development of scale in seawater distillation plants.

ANTISCALANT 9209 RX seawater distillation plants, Compatible with all types of polyamide membrane
ANTISCALANT 9209 RX powerfully Inhibits common scales Calcium carbonate/sulphate - Calcium phosphate,Barium/Strontium sulphate - Silica, Iron/Manganese

Aqutuff High foam is classifed as Cargo Hold Cleaning chemicals and also popular for general Cleaning and Maintenance as well as for Tank Cleaning. There are various type of cargo handle by Ship Bulk carrier like cement, coal, lime and many minerals which is not only directly effecting metal surface of ships but also if charterer or owner wants to change cargo specially for food grain then Aquatuff cleaner plays very important role to clean ship hold on fast and safe.

Alias:

Hold cleaning detergent, Cargo cleaner, Ship Hold Cleaner

Active Matter:

45-48%

Application:

Hold Cleaning Chemicals Aquatuff High foam can be delivered in ports worldwide. Specially our stron network in India and Middle East makes us no1 supplier of hold cleaning chemicals. It is a heavy duty non corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high pressure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.

AQUA TUFF HIGH FOAM LIQUID - HD (RXSOL-22-3033-025)

The Importance of Rx Tuff by High-Pressure Cleaning

The job of high pressure cleaning can be done easier & quicker by simply using RxTuffin correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

3 Pieces of Good Advice:
Apply RxTuffon dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RxTuff will give the best effect .

Product Description:-RxTuff is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .

Applications:-RxTuff Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.

Directions for Use and Dose Rates:
General Cleaning:- RxTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination RxTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. RxTuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RxTuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.

Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.

Method of Application and Dose Rates:-

Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-

Spray RxTuff on with a high pressure cleaning machine and use 1:6 with water. If used with hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
Leave for about 30-45 minutes. The surface should be kept wet.
Wash down with hot water (80°C) and check the cargo tank.
Repeat the procedure if necessary.

Packing Size:

50.00 Ltr.

Image:

Thumb:

Using Procedure:

Cleaning agents used in Aquatuff for hold cleaning solution is fully biodegradable and not be harmful to the marine. Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.

Heavy Soil deposition Use Undiluted or up to 5% dilution with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

It can be use as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.

General Cleaning Method :

Step 1: Spraying the AquaTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet after 10-20 minutes

After the AquaTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the AquTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of AquaTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.

Note:- For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.

Note:

Aquatuff High Foam having good foaming qualities to clean dry cargo to load food grain cargo standard.

Related Products:

Slip Coat RXSOL HOLD BLOCK 210 Ltr

Cement Remover RX Hold

COAL REMOVER rx hold 50 Ltr

Lime Remover HD

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Article News:

Aquatuff chemicals along with ship hold cleaning equipments

Aquatuff price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Aquatuff Ship hold cleaning chemical

Aquatuff High Foam resulting good foam with high pressure machine

Hold Cleaning chemicals

Short Description:

Very effective hold cleaning chemicals cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washi

Information:

Bulk carrier cargo hold cleaning chemicals suitable for cargo hold washing. We also supplying lime washing cargo holds cleaning chemicals, slip coat for hold block coating and metal brite to clean rust and sclae and many more marine Tank and hold cleaing chemicals. Lowest price at all Indian and Middle East port is guranteed to our customer, Ship Chandler, Ship Cahrterer, Shipping Agent...

Metal Brite plays an important role during the Ship Hold rust cleaning process. As Metal Brite chemically develop to dissolve Rust Deposits from metal and painted surface. And after cleaning of rust from Metal Brite our experienced technical and chemicals engineer suggested that, if the metal surface will be left without further neutralization from alkali materials, then the surface will catch rust immediately. Here Aqauatuff High foam ( Acts as an alkaline cleaner ) plays a chemically neutralizing role on metal surface after uses of Metal Brite. MSDS, Technical Bulletin and using procedure of Metal Brite Available through this Link. http://www.rxmarine.com/metal-brite-ii

Our company knows the value of Metal Brite during Ship Hold Cleaning process... And we are happy to offer free 1 cane of Metal Brite on every purchase of Aquatuff High Foam 1000 Ltrs.

Each cane of Metal Brite is more than sufficient to remove rust stain from well maintain ship's hold. Otherwise, Metal Brite required qty will be more, Depends on contamination of RUST on Ship Hold surfaces and Nut Bolt Area.
Metal Brite stock is available at Mumbai, Kandla - Gandhidham, Surat, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Fujairah - Dubai, Middle East.

Aquatuff High Dense Foam to clean ship hold vertical surface. If we'll observe Ship hold bulk carrier maximum surface area part is having slop vertical height. Cleaning of such vertical part with liquid is not helpful as it rapidly comes downwards. Aquatuff High foam is alkaline high foam detergent, due to its alkalinity value acidic component of residual part of cargo easily get neutralised. And its high foaming action resulting to sustain on vertical surface for long time period. This is the reason Aquatuff High foam is one of popular Ship HOLD cleaning alkaline detergent. We are keeping ready stock of Alkaline Aquatuff High Foam at our all Indian and Middle East major port. Pl. click here http://rxmarine.com/where-to-buy , to known our STOCK point contact details to get Aquatuff High Foam directly on board. Mail us : mail@rxmarine.com

Alkaline Cleaning Detergent with customized formulation

FAQ:

Importance of Aquatuff ?

Coal to food grain changes

Aquatuff high foam liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is - Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

Alias:

High Foam detergent for ship cargo hold cleaning

Active Matter:

45-50

Application:

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aquatuff High Foam plays very important role in washing down with use of chemicals. Aquatuff High foam classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Packing Size:

210.00 Ltr.

Image:

Thumb:

Using Procedure:

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using AquaTuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the AquaTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the AquTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the AquaTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of AquaTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.

General Cleaning :- AquaTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination AquaTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of AquaTuff to a bucket of water. The aqutuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aquatuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, AquaTuff is not recommended for washing machines.

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

Note:

Aquatuff high foam is absolutely free along with the purchase of slip coat - Hold block materials. Aquatuff High foam Free 1000 Ltr against 1000 Ltrs purchase of Slip Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Related Products:

AQUATUFF LIQUID 50 Ltr

Cement Remover RX Hold

COAL REMOVER rx hold 50 Ltr

Lime Remover HD 25 Ltrs

Slip Coat RXSOL HOLD BLOCK 210 Ltr

Hold Wash Concentrate RX

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Burlup - Burlap

Featured Product :

Featured Product

Article News:

Aquatuff marine hold cleaning and degreasing chemicals

Aquatuff MSDS

Aquatuff High Foam ship hold cleaning detergent

Differences between Aquatuff High Foam and Aqautuff

Aquatuff high foam application and cleaning method and manual

Aquatuff Cleaning action

Aquatuff High Foam Ship Hold cleaning detergent

How to clean Carbon deposits from Ship hold Bulk carrier?

Aquatuff High Dense Foam to clean ship hold vertical surface

Short Description:

Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washi

Information:

Aquatuff High foam is specialized ship hold bulk carrier cleaning chemicals. Our group team also providing direct online support for cleaning tips during Hold cleaning of ships. Aquatuff High Foam MSDS and Using procedure also available online to our customer. We are one of largest ship hold cleaning chemicals supplier in India - Middle East which also covers Lime Remover, Coal Remover, Slip coat, Hold Wash and many more...Pl. click here ( http://www.rxmarine.com/HoldSolution-22 ) to know our various range of Hold Cleaning products...

Aquatuff for bulk carrier cargo hold cleaning alkaline detergent, Other then aquatuff cargo hold cleaning chemicals lime washing chemicals for cargo holds and pet coke cargo hold washing detergent also popular for specificed lime and and pet cargo. We are also keeping ready stock of cement hold cleaning chemicals, Hold Block - Slip Coat, Hold Wash etc...

Cargo Hold Cleaner, Bulk Hold cleaning etergent, Chemical Agent for hold cleaning, Hold Cleaning Kits detergent

Importance of Alkleen Safety Liquid / Aquatuff Cargo hold cleaner for coal and pet coke:

Aquatuff High foam and Aqua tuff / Alkleen Safety Liquid cleaner is most common marine cleaning chemicals for cargo hold cleaning after coal and pet coke.

Two Major Benefit of cleaning of Pet Coke:-

Pet coke residue contains oil content, which is creating more difficulties during the cleaning operation. Aquatuff high foam and one of our specialized product called Alkleen Safety Liquid which is absolutely non-hazardous and biodegradable cleaner.

Petcokes also have sulphur content which is the main cause of corrosion due to its electrochemical corrosion mechanism. In presence of moisture and sulfur metal surface charges as anodic and damaging the hold paint due to electrical ion charges. Here presence of Alkleen Safety Liquid / Aquatuff increasing the alkaline effect and neutralizes the effect of Sulphur.

Ship marine hold cleaning chemicals

Aqua tuff most suitable for cargo hold and tank cleaning.

Aquatuff High foam plays very important role during ship hold cleaning http://rxmarine.com/Aqua-Tuff-High-Foam-conc , Its high foam abilityincreasing Aquatuff cleaning power on the vertical surface, As liquid product can't sustain on the vertical surface while HIGH composite FOAM can sustain on the surface which is resulting from good cleaning effect.
Extra foaming is major features which is differentiating Aquatuff high foam to general Aquatuff.

Aquatuff High foam using procedure and cleaning method :
1st Step Cleaning of extra and excess loose particle:::
Before applying Aquatuff high foam on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual.
2nd step is for Mixing and dilution of Aquatuff:::
If cleaning step is with HP machine ( High Pressure ), Then mix concentrated Aquatuff high foam with fresh water, it can be diluted 1 Ltrs Aquatuff High foam with 4 to 5 Ltrs Fresh water.

If cleaning step followed by hand spray, Then apply aquatuff high foam neat on the surface. Approx 1 ltr covers 10 to 12 square meter.

3rd Step final procedure:::

Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 - 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.

Aquatuff High Foam supplier in Mumbai, Nhava Seva, Pirpav, Surat - Hazira, Kandla - Gandhidham, Sikka - Mundra, Manglore - Goa, Vizag - Visakhapatnam, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Paradip, Buj buj, Dubai - Sharjah, Fujairah Middle East

Shipping Tanker, Bulk Carrier cleaning agent, Hold Cleaning Agent. Heavy Duty Alkaline Cleaner with Extra Foaming Effect.

Aquatuff high foam is absolutely free along with the purchase of slip coat - Hold block ( Pre load ) materials. Aquatuff High foam Free 1000 Ltr with the purchase of 1000 ltrs Slip Coat Plus is available at Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf

Here the question that arises is why Aquatuff Cleaner is so important during Ship Hold Cleaning?

Aquatuff is alkaline in nature which neutralizes the acidic residue created due to the presence of moisture and products like coal, sulphur, salt etc. And emulsification effect of aquatuff makes alll oil stain water soluble. It means Aquatuff's major role is to neutralize the acidic residue and emulsifying Oil residue. One more important feature of Aquatuff high foam results in the formation of dense foam with high-pressure machines, which can easily be applied even on vertical surfaces.

Aquatuff High Foam - Acts as an Acid Neutralizer - Useful for coal, Sulfur, Salt as its residue when in contact with water, is acidic in nature which directly damages the painted and metal surfaces.

Aquatuf High Foam - Acts as an Oil residue Emulsifier - Useful for removal of coal and oily residue.

Aquatuff High Foam - Results in Dense foam - Can be applied on the vertical surface for the long duration.

The largest supplier of Aquatuff high foam in Asia ( India and Middle East). More details of Aquatuff High Foam like MSDS and Using procedure of will be available through this link:

http://rxmarine.com/aquatuff-emulsifier-liquid link http://rxmarine.com/aquatuff-emulsifier-liquid

Aqutuff high foam cleaner detergent for ship hold cleaning

FAQ:

What is Aquatuff High Foam used for?

Cargo hold cleaner for coal and pet coke

Importance of Aquatuff ?

Metal Brite for Ship Hold rust cleaning?

Aquatuff is Free

Peracetic acid supplier and Exporter from INDIA.

A water like clear & colorless liquid. An aqueous equilibrium solution containing peracetic acid, Hydrogen peroxide, acetic acid and special stabilizers. This product is considered environmentally safe since it decomposes to acetic acid and oxygen. Acetic acid is completely biodegradeable.

Alias:

PAA 15%, PAA 5%, P3 Oxonia Active,  Peracetic acid (PAA), Peroxyacetic acid, Ethaneperoxy acid, Peroxyethanoic acid, Equilibrium peracetic acid, Proxitane®

Active Matter:

Application:

Sanitizer in breweries, beverage, juices, food processing and equipment : meat, bakery, poultry, sea food and disinfection in hospital (facility sanitization)

Packing Size:

30.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

Formula : CH3COOOH

CAS NO. : 79-21-0

Synonyms : Peracetic acid, Acetyl Hydroperoxide

Molecular weight : 76.05 g/mole

Physical and Chemical properties:

Form : Liquid

Color :Clear, Colorless

Odor :Strong purgent

Note:

Product performance : Best if used within 12 months and stored at 35ºC MAX

Test Method : Determination of the concentration by titration with Sodium Thiosulphate.

Handling & Storage

Safe handling advice : Never return unused material to storage receptacle. Avoid exposure. Provide appropriate exhaust ventilation. Wear suitable protective clothes. Open drum/container carefully. Content may be under pressure

Technical measures/Precautions : Keep away from sources of ignition. No smoking. Keep away from combustible material. Protect from Contamination. Do not heat over +30 oC

Storage : Keep in a cool, well-ventilated place. Keep away from heat, direct sunlight and sources of ignition. Store in original container equipped with a vent.

Incompatible products : Metal chlorides, bases, reducing agents, organic materials, contamination.

Spills clean up : Dam up. Flush very dilute solution into sewer with plenty of water. Never return spills in original containers for reuse.

Related Products:

Acetic Acid, Glacial

Safety Accessories:

Goggle Chemical Protective

Protective Suit HD

Featured Product :

Featured Product

Article News:

Dealers, suppliers and Exporter for all kinds of acids Chemicals Powder

Short Description:

Peracetic acid is an environmentally safe and versatile anti-microbial agent and a powerful antioxidant

Peracetic acid is an environmentally safe and versatile anti-microbial agent and a powerful antioxidant. Peracetic Acid can be applied for the deactivation of a large variety of pathogenic microorganisms. It also deactivates viruses and spores. Peracetic Acid activity is hardly influenced by organic compounds that are present in the Water. Peracetic Acid is used mainly in the Food Industry, where it is applied as a cleanser and as a disinfectant. It is applied for bacteria and fungi removal. It was also used for the disinfection of recycled rinsing water for foodstuffs.

Peracetic acid is applied for the disinfection of medical supplies and to prevent bio film formation in pulp industries. It can be applied during water purification as a disinfectant and for Plumming Disinfection. Peracetic acid is suitable for cooling tower water disinfection; it effectively prevents bio film formation and controls Legionella bacteria. It’s an alternative for chlorine, sodium hypochlorite and chlorine dioxide. It decomposes into biodegradable components and doesn’t create chlorinated compounds or harmful disinfection by-products.

Grades available: PAA 5%, 12%, 15% & 20% (customized concentration can also be explored).

Packing: In 30kg and 200kg polythene drums with vented type cap.

Also as cooling tower disinfectant

Evaporator Coil Cleaner is a special blend of effective ingredients designed to penetrate and remove built-up grease, dirt and oxidation from finned coils, cleaning in one step. Evaporator Coil Cleaner DOES NOT CONTAIN ACID.
Buildup of greasy dirt on air conditioning or refrigeration cooling coils makes the units work much harder. Impeded air flow and poor heat transfer can put a sever strain on both the equipment and the pocket book. Cleaning removes dirt and greasy film from evaporator coils and enables the equipment to operate more efficiently.

Alias:

Greenleaf Evaporator Coil Cleaner

Active Matter:

54 - 58

Application:

What is EVAPORATOR PLANT ?

For production of fresh water Large ships usually carry evaporating plants.
Steam ships must be able to produce high-quality distillate in order to maintain boiler-water levels.

Diesel-engined ships often utilise waste heat as an energy source for producing fresh water. In this system, the engine-cooling water is passed through a heat exchanger, where it is cooled by concentrated seawater (brine). Because the cooling water (which is chemically treated fresh water) is at a temperature of 70–80 °C (158–176 °F), it would not be possible to flash off any water vapour unless the pressure in the heat exchanger vessel was dropped. To alleviate this problem, a brine-air ejector venturi pump is used to create a vacuum inside the vessel. Partial evaporation is achieved, and the vapour passes through a demister before reaching the condenser section. Seawater is pumped through the condenser section to cool the vapour sufficiently to precipitate it. The distillate gathers in a tray, from where it is pumped to the storage tanks. A salinometer monitors salt content and diverts the flow of distillate from the storage tanks if the salt content exceeds the alarm limit. Sterilisation is carried out after the evaporator.

Evaporators are usually of the shell-and-tube type (known as an Atlas Plant) or of the plate type (such as the type designed by Alfa Laval). Temperature, production and vacuum are controlled by regulating the system valves. Seawater temperature can interfere with production, as can fluctuations in engine load. For this reason, the evaporator is adjusted as seawater temperature changes and shut down altogether when the ship is manoeuvring. An alternative in some vessels, such as naval ships and passenger ships, is the use of the reverse osmosis principle for fresh-water production, instead of using evaporators.

MECHANISM of EVAPORATOR :::---
Lots of heat is absorbed in the process this is called the latent heat of vaporization and makes for very efficient heat transfer because the freon is vaporizing in this coil, it is called the evaporator coil Freon makes an excellent heat transfer material at atmospheric pressure, it is a colourless gas when it boils. absorbs a lot of heat when it condenses from a gas to a liquid, it gives off a lot of heat (this is helpful when discharging heat to the outside through the condensing coil)

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

¨ Economical - mix one part Evaporator Coil Cleaner to four parts water.
¨ Safer than acid cleaners.
¨ Cleans coils in one step - no rinsing needed.
¨ High foaming for faster penetration

OTHER GRADE of COIL CLEANER :::

Condenser Coil Cleaner RXSOL-50-5015-025 ( condenser coil cleaner and brightener )

Coil Brite Rx Yellow RXSOL-16-1680-005 ( For Oxide and dirt removal )

Air Cooler Cleaner RXSOL-16-0009-025 ( For cleaning of greasy materials )

Note:

Use Instructions:
1. Protect eyes and skin with appropriate safety items.
2. May be used with unit on or off.
3. Use low pressure spraying tank.
4. Mix one part Evaporator Coil Cleaner to four parts water.
5. Spray Evaporator Coil Cleaner solution into coils and allow approximately a ten minute contact time for best results. Condensate will rinse coils. Rinse filters with clean water.

RXSOL brand is very popular as a Evaporator Coil Cleaner manufacturer. And our group division have Evaporator Coil Cleaner supplier network for manglore, Navi Mumbai, Goa, Mumbai, Kakinada, Gangavaram, Vizag, Visakhapatnam, Ennore, Chennai, kandla, mundra, sikka, Surat, Fujairah, Sharjah, Dubai, Abudhabi, Middle East, Gulf. we are RXSOL Evaporator Coil Cleaner exporter for Saudi Arabia, Iraq and Kuwait.

Related Products:

Coil Brite Rx PINK

Coil Brite Rx Yellow

Coil Cleaner (Air Conditioning System)

Coil Cleaner Free from ACID

Air Cooler Cleaner 25 Ltr

Air Cooler Cleaner Alkaline 25 Ltrs

Air Cooler Cleaner LT 25 Ltr

Carbon Cleaner LT

Featured Product :

Featured Product

Video Links:

Coil Cleaner

Short Description:

Ingredients designed to penetrate and remove built-up grease, dirt and oxidation from finned coils, cleaning in one step. Cleaning and removal of dirt and greasy film from evaporator coils and enables the equipment to operate more efficiently.

It is a specially engineered condenser coil cleaner and brightener have safe bioderadable non acidic formula. this product is recommended for use in hotels, commercial complexes, hospitals, shipyards, Heavy Industries and it can be used indoors making it highly suitable for cleaning refrigeration units in shopping malls, food shops, supermarkets, butchers and wet fish shops. and any air-conditioning workshops or establishments that services air conditioning systems.

RXSOL-51-6004-025 Clean Evaporator coil is the first step in ensuring maximum compressor efficiency. Coil Cleaner has a foam that cleans heating and refrigeration coils, fins and fan blades. As the foam breaks down, it carries away dirt, dust, grease, oil and other residue

RXSOL-51-6004-025 coil cleaner will not corode coils and is safe to use on surrounding metals and other HVAC equipment components.

Cooling coils trap dust, soil, grime and other troublesome deposits that reduce the heat transfer efficiency of HVAC units. This build-up interferes with proper system operations. RXSOL-51-6004-025 Coil Cleaner effectively removes accumulated build-up, restores operating efficiency and prepares the unit for the control of harmful organisms with Greenleaf Aquacide QLF Microbiocide.

RXSOL-51-6004-025 Cleaner effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC components. RXSOL-51-6004-025 Coil Cleaner is safe for all metal, including aluminium.

RXSOL evaporator coil cleaner is the perfect first step in improving compressor effeciency.

Evaporator Coil Cleaner DOES NOT CONTAIN ACID.

This is a reverse osmosis membrane treatment chemicals. It is highly concentrated polymer chemicals. Antiscalant manufacturer, supplier and Exporter.

RO antiscalant

Alias:

HYPERSPERSE MDC220, Antiscalant, RO, Disperso 370, Flocon 135, Membrane Support PURE 9900, VITEC 5300

Active Matter:

90-92

Application:

Performance:

This product offers a variety of critical performance and application benefits: Inhibits RO membrane scaling caused by the following:

Calcium Carbonate:	CaCO3
Calcium Sulfate:	CaSO4
Barium Sulfate:	BaSO4
Strontium Sulfate:	SrSO4
Calcium Fluoride:	CaF2

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Dosing Guidelines:

The typical dosage range is between 2 to 5 ppm or Typical dosage range is between 2 and 6 mg/L.

Dilution:

This product is formulated to be injected neat. However, if a dilution is required, use demineralized or RO permeate water. If neither of these is available, softened water may be substituted. The dilution for Vitec 1000 should not result in a solution strength of less than 10%. This guidelin will protect the effectiveness of the internal bacteriostat which inhibits bacterial growth in the drum and feed tank.Maximum dilution is temperature related as shown below.
Temperature, °C     Maximum Dilution, %
<30                                        12
30-35                                     25
>35 50

Packaging and Storage:

Standard regional pack sizes are listed below and custom packaging can be provided worldwide. This product should be protected from freezing.

Specifications
Appearance:	Yellow liquid
pH (10% solution):	2.9
Specific Gravity@20oC	1.67 - 1.2

Packing 30 Kgs, 230 Kgs drum.

Related Products:

ANTISCALANT 9209 RX ( seawater distillation plants )

Membrane Antiscalant ALKA 191T

Membrane Cleaner RXSOL- 3304

ORG MC 882 Membrane Cleaner

Acid corrosion Inhibitor RXSOL 213

Featured Product :

Featured Product

Article News:

Antiscalant supplier in Mumbai

Seaclean Tank cleaner and degreaser

Hardness controller for RO membrane

Short Description:

This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals.

Antiscalant RXSOL ORG EV is a high performance liquid product for the control of alkaline scaling (calcium carbonate and magnesium hydroxide) in all types of seawater distillation plants. Antiscalant ORG EV is an aqueous solution of a synthetic polymer based on hydrolysed maleic anhydride.Used alone or in conjunction with a sponge ball cleaning system its effectiveness has been demonstrated in distillation plants operating with top brine temperatures up to 120 ºC.

Alias:

Belgard EV

Application:

Antiscalant RXSOL ORG EV can be used in all types of distillation plant but is particularly suitable for use in multi-stage flash plants.

:::::::::::::::::

RO antiscant

Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.

RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.

Key Features and Benefits

Inhibit scale formation and effectively controls corrosion
Protects the membrane efficiently
Enhance the plant operation and equipments life span
Economical
Easy in usage and handling

Our RO Antiscalant (HIGH PH) is a super-threshold RO membrane antiscalant and antifoulant which is able to stabilize a wide range of supersaturated salt solutions, thereby preventing the precipitation on the membrane surface.

It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate.

It is a very effective antiscalant . It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.

Key Features and Benefits

Effective scale inhibition
Alkalinity builder
High recovery rate
Low Chemical dosage
Cost Effective
Effective Iron fouling control by sequestration
Reduced frequency of membrane cleaning
Compatible with all types of membranes
Completely organic and biodegradable

Application and Dosage
Our RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.

In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.

At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used.

Antiscalant RO RXSOL-33-3302-025
Antiscalant C.I ALKA RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T RXSOL-33-3321-030
Antiscalant ORG EV 2030 RXSOL-33-3325-230
Antiscalant RXSOL ORG EV RXSOL-33-3327

Packing Size:

240.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

Antiscalant RXSOL ORG EV is an aqueous solution of an organic acid and as such is corrosive in its concentrated form. Corrosion resistant dosing equipment must be used. Examples of suitable materials are 316L stainless steel and PVC or other plastic materials. Recommended injection points are either into the seawater make-up line after any external de-aeration and decarbonation equipment or into the recycle brine stream at a suitable point after the blowdown and typically into the discharge of the recycle brine pump

Antiscalant RXSOL ORG EV is miscible with water in all proportions. It may be applied as the neat product, or as a solution in distillate and should be dosed continuously, and proportionately to the seawater make-up flow, to maintain the recommended dose level.

The dose level required will depend on a number of factors, including the quality of the seawater feed, TBT, recycle brine concentration factor, the type of distillation plant and frequency of application of the sponge ball cleaning system. Typical dose levels, when used in conjunction with a sponge ball cleaning system, are 0.8 to 1.2 mg/l at TBT 90 ºC and 2.0 to 3.0 mg/l at TBT 110 ºC. Detailed recommendations for any plant will be made on request

Note:

Thermal Stability:
Thermogravimetric analysis and differential scanning calorimetry have shown that Antiscalant RXSOL ORG EV is stable up to a temperature of 300 oC.

Chemical Reactivity:
Antiscalant RXSOL ORG EV is not affected by chlorine or other oxidising biocides under normal conditions of use. It is readily broken down by strong oxidising

Packing : Net weight 240 kg Gross weight 248.5 kg. Antiscalant RXSOL ORG EV is also available in Bulk packing in IBC Tank as 1200 Kgs and small packing as 25 Kgs.

Handling : Avoid inhalation of vapors/spray and contact with skin and eyes. Avoid eating, drinking and smoking when using the product. Observe good chemical hygiene practices.

Storage : Protect against physical damage and/or friction. Keep in original container. Store in tightly closed original container in a dry and cool place. Store away from: Alkalis. Reducing Agents. Do NOT use container made of: Carbon steel. Store away from strong oxidising agents.

Shelf Life : 24 Month from date of Mnaufacturing

Related Products:

Antiscalant RO

ANTISCALANT 9209 RX ( seawater distillation plants )

Antiscalant ORG EV 2030

Membrane Antiscalant ALKA 191T

Featured Product :

Featured Product

Article News:

Antiscalant supplier in Mumbai

Hardness controller for RO membrane

Short Description:

Antiscalant for Seawater Distillation Plants

Alias:

DEWT NC, Liquid EWT, Cooltreat, Jacket Water Inhibitor, nalco 2000 , Engine water treatment, NCLT diesel ,LIQUIGAURD 2000, ENGINE JACKET WATER CONDITIONER , Gyrocor W.C., Aquafine 103, Care Treat

Active Matter:

68 - 75

Application:

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4034-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

Before testing of Nitrite level, Here is some point and guideline, what you need to do. : 1 take the following readings; pH, TDS (uS), and nitrite level.and record. 2 add the Chemical your are using. 3. wait for a period of time for the sysem to circulate. hours> 4. Re check the readings. and record. 5 track these readings
for a period of time.

If the TDS and Nitrite drop you have a leak/ unknown makeup. if the TDS stays stable and the nitrite drops you have a biological problem. Bacteria that convert nitrite to nitrate.

Solution ::: Use DI water in place of general water, And also use. Algaecide to control Bacterial growth inside water system ... http://rxmarine.com/Biocide-Algaecide

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Refer to technical datasheet.

GENERAL RECOMMENDATION :

Nitrite (as PPM NO2)	0	100-200	300-600	700-900	1100-1300
RXSOL-40-4033-025 / 1000L	13.0	11.3	8-10	5-7	1.5-3.5

NOTE ::: -- If nitrite level becomes 1440-2400 then doses should be ZERO.

Note:

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

Related Products:

Diesel Guard NB Pwd ( Rust Scale Inhibitor ) DEWT

Descaling Liquid 25 Ltrs

Alkalinity Control 25 Ltrs

Cooling Water Test kit RXSOL 309

Safety Accessories:

Hand Gloves Chemical resistance

Goggle

Featured Product :

Featured Product

Article News:

Cooling Water Treatment- Techniques and its Uses

Coolant Manufacturer Exporter and Supplier

CHEMICALS FOR CHILLED WATER FLUSHING control of bacteria, fungi and algae

Aquatuff, ACC, Carbon Remover, Electrosolve supplier

Short Description:

Corrosion Inhibitor for Water Systems having unique formulation with highly concentrated liquid cooling treatment compound

Information:

Ship chandlers in Mumbai, Kandla, Chennai - Ennore, Kolkata - Haldia, Vizag - Visakhapatnam, Dubai - Sharjah.

DIESEL WT, Rocor NB Liquid, CWT Diesel QC2, Liquidewt. Free Nitrite Test Kit available on purchase of more then 500 Ltr Rocor NB Liquid. Our higher concentration of ragent resulting low dosage of chemicals to obtain highe Nitrite label in cooling water system. And compare our Price of ROCOR NB in India - Middle East before closing your deal, we are sure to provide you BEST price among all.

Rocor NB MSDS and using procedure, E catalogue available online. ROCOR NB liquid classified as corrosion inhibitor for cooling water system of diesel engines, compressors, process cooling systems etc.

Rocor NB Liquid is used in a dosage of 1200 - 3000 mg/l nitrite (NO2), dependent on the chloride level. ROCOR NB Liquid is the ideal corrosion inhibitor for closed heating or cooling systems, such as diesel engine. Rocor NB Liquid is nitrite/borate based compound with additional water softner.

Rocor NB Liquid is a liquid, nitrite/borate based compound with organic ... Use the dosage chart overleaf to adjust treatment to obtain the optimum level.

Rocor Nb liquid supplier and stockist in Mumbai, Nhava seva, Kandla - Gandhidham, Chennai - Ennore, Vizag - Visakhapatnam, Gangavaram, Kolkata - Haldia, Paradip, Fujairah - Dubai, Middle East - Gulf. If your cooling system is small dont waste your money to buy BIG VOLUME of container, mail us to buy small container like 5 Ltr of Rocor NB as it is easy to handle and control extra wastage during storge. Corrosion Inhibitor for cooling water system protect against corrosion and scale formation.

Effective corrosion inhibitor for the common ferrous and non-ferrous metals found in engine cooling water systems. Diesel engine cooling water systems. Popular in Shipping and Marine oilfied Industries as a major component in cooling water system.

Air Cooler Cleaner Sea Water SIDE is specialized product to dissolve water scale smoothely. We are manufacturer and supplier of Air Cooler Cleaner Sea Water SIDE.

Alias:

De-scalex (Liquid), YUNISOL X, Safe Acid Descalex Liquid.

Application:

RXSOL-54-1048-020 is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser RXSOL-10-1005. RXSOL-54-1048-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-54-1048-020 ,

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of RXSO-20-2005 in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised solutions can be re-activated by adding more RXSOL-54-1008-025 until the red colour reappears.

Fields: Descaling of Boilers, Descaling of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025 in sea water. After use of RXSOL-54-1008-025 a 0.5% solution of Alkalinity Control in fresh water should be used for neutralization.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

After using RXSOL-54-1048-020, sense all metal surfaces with 0.5 percent of RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc

Why Use RXSOL Descaler?

It is a safe , economical concentrated chemical to be used on the waterside of heat transfer equipment.
You do not have to heat RXSOL-54-1048-020 .
RXSOL-54-1048-020 is safer for the employees to use than other acid products.
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
Cleans down to the original surface without pitting.
RXSOL-54-1048-020 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
RXSOL-54-1048-020 will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
Removing the scale build up allows your equipment to operate more efficiently with less down time.

Note:

• Automotive - Closed Circuit Cooling, Dynamometers, Extruders, Molders, Radiators, Welders

• Bottling - CO2 Generators, Heaters, Exchangers, Rinse Tanks, Sterilizers, Washers

. HOUSE HOLD - Dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.

• Buildings - Chillers, Cooling Towers, Pipework

• Chemicals - Dryers, Extruders, Kettles, Mixers, Reactors, Scrubbers, Vacuum Pumps

• Food - Condensers, Ice Machines, Kathabars, Refrigeration Equipment, Steam Tables

• Manufacturing - Chillers, Compressors, Furnaces, Quenchers, Vacuum Pumps

• Metals - Bearings, Castings, Fans, Hearth & Vacuum Furnaces, Shelters, Sprays

• Mining - Bearings, Conveyors, Filters, Presses, Process Lines, Radiators

• Paper- Calendar Mill Rolls, Caustic Lines, Scrubbers, Compressors, Liquor Tanks, Pulverizers, Vacuum Pumps

• Pharmaceutical- Exchangers, Loop Systems, Kathabars, Pumps, Reactors, Stills, Sterilizers

• Refinery - Compressors, Converters, Crackers, Exchangers, Piping, Pumps

• Rubber/Plastics - Banbury Mixers, Calendar & Mill Rolls, Extruders, Injection Molders, Molds, Temperature Control Units, Throat Coolers, Towers, Tubers

• Steel - Bearings, ConCast Units, Generators, Hearths, Spangle Units, Furnaces

• Textile - Air Washers,Compressors, Condensers, Exchangers, Extruders,Towers

Boilers

Condensers

Filters

Heat Exchangers

Kettles & Tanks

Pipelines

Pots

Reactors

Steam Jackets

Bath Rooms and Showers

Metal Processing and much more!

Applications

Automotive	Bottling	Chemicals	Food
- Closed Circuit Cooling - Dynamometers - Extruders - Molders - Radiators - Welders	- CO2 Generators - Heaters - Exchangers - Rinse Tanks - Sterilizers and Washers	- Dryers - Extruders - Kettles - Mixers - Reactors - Scrubbers - Vacuum Pumps	- Condensers - Ice Machines - Kathabars - Refrigeration Equipment - Steam Tables
Manufacturing	Metals	Mining	Paper
- Chillers - Compressors - Furnaces - Quenchers - Vacuum Pumps	- Bearings - Conveyors - Fans - Hearth & Vacuum Furnaces - Shelters - Sprays	- Bearings - Conveyors - Filters - Presses - Process Lines - Radiators	- Calendar Rolls - Mill Rolls - Caustic Lines - Scrubbers - Compressors - Liquor Tanks - Pulverizers - Vacuum Pumps
Pharmaceutical	Refinery	Rubber & Plastics	Steel
- Exchangers - Loop Systems - Kathabars - Pumps - Reactors - Stills - Sterilizers	- Compressors - Converters - Crackers - Exchangers - Piping - Pumps	- Banbury Mixers - Calendar & Mill Rolls - Extruders - Injection Molders - Molds - Temperature Control - Units - Throat Coolers - Towers and Tubers	Bearings ConCast Units Generators Hearths Spangle Units Furnaces
Textile	Utilities	Other Applications
- Air Washers - Compressors - Condensers - Exchangers - Extruders and Towers	- Boilers - Turbines - Transformers - Cooling Towers - Air Compressors - Hydrogen Coolers - Lube Oil Heat Exchangers	- Ball Mills - Demisters - Evaporators - Locomotives - Absorption Units - Diesel Generators - Induction Furnaces

Related Products:

Air Cooler Cleaner 25 Ltr

Air Cooler Cleaner LT 25 Ltr

Air Cooler Cleaner Plus 25 Ltr

Air Cooler Cleaner Alkaline 25 Ltrs

Coil Brite Rx Yellow

Coil Brite Rx PINK

Evaporator Coil Cleaner

Condenser Coil Cleaner

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Short Description:

De-scalex Liquid for AIR COOLER WATER side.

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

However, if the amount of scales is large enough to block the tube, the cylindrical scale will usually have calcium carbonate on the outside (the side that is in contact with tube) and calcium sulfate in the center (part that seawater passes through). Calcium sulfate is easier to be formed when the temperature goes higher.

When the amount of scales increases, the contact area of scale and cleaner is very small and a longer time of dissolution is required. Calcium sulfate cannot be dissolved by an acid cleaner.

RXSOL-54-1048-020 is a powerful dissolving agent of calcium carbonate. Therefore, it is better to use RXSOL-54-1048-020 to do circulating cleaning at an early stage before the scales build up and block the tube, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

while Dirt attached on air-side fins of air coolers are a mix of carbonaceous particles such as soot and oil mist of unburned fuel components can be clean by RXSOL-16-0009-025. ( www.rxmarine.com/air-cooler-cleaner-25-ltr )
Carbonaceous particles can be removed by alkaline cleaners and oil mist can be removed by oil based cleaners. However, it is very difficult to remove the mix of these substances. If you use an alkaline cleaner, oil will repel the water based alkaline cleaner; if you use oil based cleaner, carbonaceous particles will get in the way and stop oil from being removed.

This cleaners designed to remove both carbonaceous and oil simultaneously. An effective cleaning method is to immerse one side to remove the loose stains first, and then immerse the other side. This method can efficiently remove dirt and prevent swollen dirt peeled from fins from blocking the spaces between fins.

Also Suitable for Cleaning of BOILER and Cooling Water deposition...

Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.

Chemically react with and decompose Calcium, Magnesium deposited Salts. Suitable for pipeline, boiler, HVAC, Heat Exhanger, Condenser, Evapourator, Chiller, Compressor and etc. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage . Fast and effctive scale remover .

-   Non-combustible
-   Smoke from fires is irritating
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-   Prevent run off water from entering drains if possible
- Non-poisonous ::: It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.
Non-polluting, Non-corrosive.

Uniqueness of RXSOL-54-1048-020 ::: ---
RXSOL-54-1048-020 Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

EMULSION BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Alias:

Slip Coat Hold Block Resist, RBM HOLD BLOCK , GREEN BARRIER , HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector

Active Matter:

72-81

Application:

Rxsol hold block is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Related Products:

Bilge Coat RXSOL

Hold Wash Concentrate RX

AQUATUFF LIQUID 50 Ltr

Cement Remover RX Hold

Featured Product :

Featured Product

Article News:

Aquatuff price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Aquatuff good foaming qualities

Shipchandler in Vizag Port

Lime wash is not suitable for cargo like Sulphur loading

Short Description:

Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Information:

Polymer based water soluble liquid product which is resulting thin transparent and temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.

Slip Coat RXSOL HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.

Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.

RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.

HOLD BLOCK chemicals supplier.

FAQ - Slip Coat

Capt. ravi.prakash 4:54 PM (3rd JAN'19)
to RX MARINE INTERNATIONAL
Dear Sir,
Ref our telcon, please find attached Hold photos after discharging of Australian Coal and cleaning (without applying any chemicals) in oct 2018 . Then vsl loaded Indonesian Coal and will be discharging same in abt a week. Next voyage is getting fixed to load Urea from Saudi. Basis the photos, which chemical would you suggest to be used. We were thinking of RXSOL PCS along with Aquatuff. Fyi, Owners have supplied 1200 Ltrs of Aquatuff HF last month.
Thanks & best regards,
Capt. ravi.prakash
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Dear Sir,

In image we can observe that BOTTOM line of hold is rusted, And your plan to load CLEAN CARGO like urea which is ammonia-ted product can result further heavy rusting. So here our suggestion is to go with PCS with Aquatuff HF. And after cleaning hold rust can be treated with RUST CONVERTOR by the ratio of 1:100 Ltr with water, this will change free iron rust content to orginal metal colour. ( For treatment of rust Each Hold maximum 50 Ltr RUST CONVERTOR REQUIRED ) and Finally HOLD can be treat with SLIP COAT polymer, with dilution ration of 1:100 Ltr with Water. ( For Each Hold polymer coating maximum 50 Ltr Slip Coat REQUIRED )

Refer this link to get IMAGE of CARGO HOLD. http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

USES of slip coat provide transparent POLYMER layer in between UREA and HOLD surface.

Application of SLIP COAT is always be wise decision, this will not only protect hold metal surface from UREA contact, but also helps to release cargo without adhesion on cargo.

Thanking you

WBRGDS

Silvi

http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

Protective Chemicals suitable for both sulphur and petcoke cargoes

FAQ:

Can you please advise us on best chemicals for cleaning hold block applied to ship's bulkhead and tanktop. - Capt Manjit Handa, Marine Surveyor - Noah's Ark Solutions

Comparision Lime wash and slipcoat Holdblock

Salt loading precaution

Bentonite Supplier for Oil Field Industries. It is a drilling - grade Bentonite which is naturally occuring clay .It is a High Yield Natural Sodium montomorillonite. It meets API 13A Standards.

Bentonite, very fine grind material mostly composite by clay mineral, especially montmorrilonite which chemically describe as hydrous alumina-silicate which contain small amounts of alkali and alkali -earth metals.

Alias:

Bentonite API, Montmorrilonite

Application:

• It is Viscosifier and Filtration control agent for water based Mud Systems.
• It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit.
• It is also used for clearing cat litter

Bentonite, sometimes refer as sometimes referred to as Montmorrilonite is a naturally occurring substance, composed of a number of layers, each approximately 10 angstroms thick, and each consisting of two tetrahedral and one octahedral unit. This structure is responsible for three important characteristics, the ability to absorb large amounts of moisture, the ability to exchange ions and thixotropic gel formation.

Bentonite Powder

We are reputed as one of the most overruling Bentonite Mineral Powder Manufacturers and Suppliers in India. The unmatched quality and efficacy of Bentonite Powder in various sectors like Drilling, Effluent Treatment, Electrical, Engineering, Fertilizer, Foundry, Iron ore Pelletization, Liquor & Food, Pesticides and Pharmaceutical has played a vital role in the enhancement of the demand. Moreover, Bentonite Clay Powder is available in varied grades.

Application

Drilling

Effluent Treatment

Electrical

Engineering

Fertilizer

Foundry

Iron ore Pelletization

Liquor & Food

Pesticides

Pharmaceutical

Packing Size:

50.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Bentonite can be Broadely classified in 2 grades :

Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.

Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped through the core in to the hole, then powder would be the preferred option.

The greatest application of bentonite in industries is the result of its swelling property, while combine with water able to perform multitude jobs. The sodium bentonite having more water absorption capacity makes it suitable for industries like Foundry and Civil engineering application and the calcium bentonite absorb lesser than Sodium still it has some special application like cosmetics, paper, Animal feed binder as many more to describe. Swell Well Mine Chem drilling grade Bentonite is basically a sodium bentonite acquired naturally from the mines. The mineral is processed using the advanced chemical technology for drilling from ores. The below features highlights the quality of the Swell Well Mine Chem Drilling Bentonite, Offers impermeability, Provides high barrel yield. Bentonite is valued in foundry sand binding, drilling mud and sealing agent in civil engineering works, bentonite is used as a mud constituent for oil and water well drilling. Swell Chem Mine is offering Bentonite products for drilling industry. What is Drining Bentonite ? Drilling Bentonite is the Bentonite formed to be used in drilling mud or fluid.

Note:

Advantage

• It helps improve hole cleaning capacities of drilling fluids.
• It is effective as a filtering agent.
• It promotes borehole stability.
• It can be added directly to fresh water or fresh water based drilling fluids.

Related Products:

Dolomite

Calcium Chloride Anhydrous

SODIUM Chloride Crystal PURE

Safety Accessories:

Hand Gloves Chemical resistance

Chemical Handling Apron

Featured Product :

Featured Product

Article News:

Water Treatment Chemical STOCKIST in India - Middle East

Short Description:

Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.

Information:

Bentonite premium quality products exporter from India to Middle East - Dubai.

Various grade of Bentonite :::

Drilling Grade 1

API 13A Section – 9 Grade Bentonite Powder:

Physical Analysis:

PROPERTIES	PROTOCOL	UNIT	REQUIRED	RESULT
Viscometer Dial Reading at 600 rpm	API Spec. 13A:2004/ ISO 13500: 1998	r/min	30	36
Yield Point / Plastic Viscosity Ratio	API Spec. 13A:2004/ ISO 13500: 1998	_	3 Max	2.5
Filterate Volume	API Spec. 13A:2004/ ISO 13500: 1998	ML	15 Max	14.6
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by weight	10.0 max.	10
Dry Screen Analysis(Residue Greater than 75 Microns)%	API Spec. 13A:2004/ ISO 13500: 1998	% by weight	4.0 max.	3.0 - 4.0

Drilling Grade API Packing 25 Kgs

IOP Grade Bentonite lumps :

Properties	Protocol	Unit	REQUIRED
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by wt.	12% to 40 % max.
LOI	IS:2000(P-1)-1985	% by wt.	5 – 10.
Free Swelling Volume 2gm/100ml	ASTM D 5890:1995	ml	32 min.
PH Value of 5% gel	IS:6186-1986	pH	8.0 – 10.0
Plate Water Absorption (16 hours)	ASTM E 946	%	720- 760
Gel Time 2.5gm/25 ml	IS:12446-1988	second	Instant
Methylene Blue Value	API spe 131:2004/ ISO 10416:2002	mg/gm of clay	350 - 400
Lumps size	IS:6186-1986	%	10 to 40 m.m.

Chemical specification:

Alumina as AL2O3%>15.0-19.0 Sodium max 2.70

Calcium as Cao%1.5-2.0 Na2O 2.0-2.5

Mgo 2.5-3.5 iron as Fe2o3% 13.0-18.0

IOP Grade Lumps | 25 Kg Packing

Product: Benotonite Powder for Grouting

Physical Analysis:

Properties	Protocol	Unit	Result
Liquid Limit	IS:12446-2007	ml/100 gm	350 - 450
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by wt.	12.0 Max
Dry Screen Analysis (passing through 75 um sieve)	IS:12446-2007	% by. Wt.	85.0 min.
Free Swelling Volume 2gm/100ml	ASTM D 5890:1995 or IS:12446-2007	ml	30 min
PH Value of 5% gel	IS:12446-2007	pH	9.5 - 10.0
Gel Time 2.5gm/25 ml	IS:12446-1988	second	Instant
Filterate Volume	API Spec. 13A:2004/ ISO 13500: 1998	ml	20 max
Viscosty at 600 rpm	API Spec. 13A:2004/ ISO 13500: 1998		30 min
Methylene Blue Value	API spe 131:2004/ ISO 10416:2002 / IS:12446-2007	mg/gm of clay	350 - 400

Grouting Grade | 25 Kg Packing

PRODUCT: Ceramic Grade Bentonite Powder

Physical Analysis:

Properties	Protocol	Unit	Result
Free Swelling Volume 2 gm/100ml	IS:12446-2007	ml	12 - 18
Base Exchange Capacity	IS:12446-2007		70 - 80
Moisture Content % by weight	IS:12446-2007	%	10.0 - 12.0
PH Value 2% slurry	IS:12446-2007	0pH	8 - 9
Quartz Content	IS:12446-2007	%	2 - 3 %
Dry Mesh % Passing 200 B.S.S	IS:12446-2007	%	85 Minimum

Ceramic Grade | 25 Kg Packing

Sodium montomorillonite

Methanol Reformer Fuel Specification : The First Element Methanol Reformer fuel mixture is 66% Methanol / 33% Distilled Water on a volumetric basis. The mixture is prepared in a blend tank of suitable volume. The selected blend tank must be thoroughly cleaned and free of all contaminants. Ensure the mixture is sufficiently blended to produce a homogeneous mixture.

Alias:

Methanol Reformer fuel mixture is 60 to 66% Methanol / 33 to 40 % Distilled Water on a volumetric basis

Packing Size:

210.00 Ltr.

Image:

Thumb:

Featured Product :

Featured Product

Short Description:

Methanol Reformer fuel mixture is 60 to 66% Methanol / 33 to 40 % Distilled Water on a volumetric basis

Methanol mixture is 60 to 66% Methanol / 33 to 40 % Distilled Water on a volumetric basis

VapourTreatment (For controlling of Scale & Foam) ::: Neutral Liquid for prevention of scale in seawater Evaporators
This is a highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc.

Alias:

Vaptreat L, Nalfleet Maxi-Vap Plus / Ameroyal, Vaptreat L, Liquivap HC 130, Ameroyal CF, Eazy Vapcare

Application:

Procedure Of Use and Dose Rates: POLYELECTROLYTE polymer of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evaporator line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Dosage :

Daily Out Put Evaporator	Daily RXSOL VT 6001 Requirement
10 - 20 MT	100-200 ML
30 – 40 MT	300-400 ML
50 – 60 MT	500-600

Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting i.eThis will last 24 hours.

Note: We can remove existing mineral scale deposits by using A 5-10% solution of RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).

Note:

Improves the quality of distilled water.

Related Products:

Oxygen Scavanger

One Shot Universal Liquitreat 100 25 Ltrs

Condensor Radiator Scale Controler 25 Ltrs

Descaling Scalefoe Compound

Anti Foaming Scale Inhibitor

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Article News:

Evaporator Treatment - Technique and uses

Vap Treat – A highly active antifouling and water scale inhibitor

How to improve Distilled Water quality

Why Marine Chemicals?

Marine Maintenance ship cleaning detergent chemicals

Vaptreat Liquid Evaporator Treatment chemicals

Short Description:

Neutral Liquid for prevention of scale in seawater Evaporators

Information:

Vaptreat - directly control scale deposition in evaporators water formation system. Since 1995 we are working with same product formulation and addition of composite polymer electrolytes not only helps to increase repulsion force in between scale formation molecule but also helps to keep evaporator maintenance free. We are one of popular supplier of vaptreat in Mumbai, Kandla, Mundra, Sikka, Manglore, Goa, Vizag, Chennai, Ennore, Kolkata, Haldia and all surrounding Indian as well as Middle East port.

Evaporator Treatment Chemicals

Alias:

LIME-OUT, ANTISCALLENT, DESCALER MTA, SCALESOL,Care Clean HDD, Eazy Descaler, DESCALE IT, 651 571563

Active Matter:

68 - 72%

Application:

Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form..

Heat Losses in Boiler due to scale

Thickness of Scale	Increase in fuel consumption due to scale

0.5 mm	2 %
1 mm	4 %
2 mm	6 %
4 mm ( 0.125” )	10 %
8 mm ( 0.25” )	20 %
16 mm ( 0.5” )	40 %
30 mm (1” )	80 %

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

RXSOL-11-1008-025 is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of RXSOL-11-1008-025 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser RXSOL-10-1005.

RXSOL-11-1008-025 should be mixed with fresh water to form a solution of 5-30%, depending on the extent of scaling.

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of RXSOL-20-2005 ( www.rxmarine.com/alkaleen-liquid-heavy-duty-25-ltr ) in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

RXSOL-11-1008--DC should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual

Note:

After using RXSOL-11-1008-025, sense all metal surfaces with 0.5 percent of RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

Why Use RXSOL Descaler?

It is a safe , economical concentrated chemical to be used on the waterside of heat transfer equipment.
You do not have to heat RXSOL 1008 .
RXSOL 1008 is safer for the employees to use than other acid products.
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
Cleans down to the original surface without pitting.
RXSOL 1008 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
RXSOL 1008 will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

Safety Accessories:

Goggle Chemical Protective

Hand Gloves Chemical resistance

HAND PROTECTION

Featured Product :

Featured Product

Article News:

Get clean boiler and cooling system with Descaling Liquid

Descaling chemicals supplier in Elamkulam, Cochin - India

Short Description:

Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all

Descaler

FAQ:

Why Rigwash?

Alias:

1-Hydroxy Ethylidene-1,1-Diphosphonic Acid [HEDP 60%], Hydroxyethylidenedi(phosphonic acid), Dequest 2010, Etidronic acid, HEDP, AQUACID 105EX, Chelating agent

Active Matter:

58-62

Application:

RXSOL-81-8160-250 chemically having wide range of applications including scale prevention and corrosion inhibition in water treatment.

Packing Size:

275.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

Note:

Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Featured Product :

Featured Product

Article News:

Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment

Short Description:

Chelating agent, Scale and Corrosion Inhibitor. Scale prevention and corrosion inhibition in water treatment.

used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating.

Etidronic acid / HEDP supplier and Exporter in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi, Ajman.

Uses / Application of HEDP
HEDP is used as a strong Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment, Textile, Sugar Processing, Dye, Soaps & Detergents.

Etidronic acid

VapourTreatment (For controlling of Scale & Foam)
This is a highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc.

Alias:

REMIDOL 1500, Green Eva, Care Treat 1 Evaporator, Evatreat Evaporator Treatment., ET 109 NorChem

Application:

Procedure Of Use and Dose Rates: POLYELECTROLYTE polymer of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evap -orator line .Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR.And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Dosage :

Daily Out Put Evaporator	Daily RXSOL VT 6001 Requirement
10 - 20 MT	100-200 ML
30 – 40 MT	300-400 ML
50 – 60 MT	500-600

Note: We can remover existing mineral scale deposits by using A 5-10% solution of RXSOL-51-6001-020

Note:

Improves the quality of distilled water

Featured Product :

Featured Product

Short Description:

Highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc.

VapourTreatment

Air Cooler Cleaner Sea Water SIDE is specialized product to dissolve water scale smoothely. We are manufacturer and supplier of Air Cooler Cleaner Sea Water SIDE.

Alias:

De-scalex (Liquid), YUNISOL X, Safe Acid Descalex Liquid.

Application:

RXSOL-54-1048-020 is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

After using RXSOL-54-1048-020, sense all metal surfaces with 0.5 percent of RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

Why Use RXSOL Descaler?

It is a safe , economical concentrated chemical to be used on the waterside of heat transfer equipment.
You do not have to heat RXSOL-54-1048-020 .
RXSOL-54-1048-020 is safer for the employees to use than other acid products.
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
Cleans down to the original surface without pitting.
RXSOL-54-1048-020 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
RXSOL-54-1048-020 will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
Removing the scale build up allows your equipment to operate more efficiently with less down time.